Practical hints
Jump starting
G
!
Never invert the terminal connections.
Warning!
Keep flames or sparks away from battery.
Do not smoke.
̈
̈
Start engine of the vehicle with the
charged battery and run at idle speed.
Observe all safety instructions and precau-
tions when handling automotive batteries
Connect negative terminals 2 and 4
of the batteries with the jumper cable.
Clamp cable to charged battery 4
first.
(୴ page 281).
The battery is located on the right side of
the trunk under the battery cover
୴ page 391).
̈ Start the engine of the disabled vehi-
(
cle.
Now you can again turn on the electrical
consumers. Do not turn on the lights under
any circumstances.
̈
Make sure the two vehicles do not
touch.
1
2
Positive terminal of discharged battery
Negative terminal of discharged bat-
tery
Positive terminal of charged battery
Negative terminal of charged battery
̈
̈
̈
̈
̈
̈
Turn off all electrical consumers.
Apply parking brake.
̈
Remove the jumper cables first from
negative terminals 2 and 4 and then
from positive terminals 1 and 3.
3
4
Shift gear selector lever to position P.
Open the trunk.
You can now turn on the lights.
̈
Connect positive terminals 1 and 3
of the batteries with the jumper cable.
Clamp cable to charged battery 3
first.
Remove battery cover.
̈ Have the battery checked at the near-
est authorized Mercedes-Benz Center.
Remove red cover from positive
terminal 1.
395
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz CL65 AMG, Mercedes-Benz W215 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |