Practical hints
What to do if …?
Lamps in instrument cluster
If any of the following lamps in the instru-
ment cluster fails to come on during the
lamp self-check when switching on the
ignition, have the respective bulb checked
and replaced if necessary.
General information:
Problem
Possible cause/consequence
Suggested solution
-
The yellow Antilock Brake
System (ABS) indicator lamp
comes on while driving.
The ABS has detected a malfunction and
̈ Continue driving with added caution.
®
has switched off. The BAS and the ESP are Wheels may lock during hard braking,
reducing steering capability.
also switched off (see messages in multi-
function display).
̈
Read and observe messages in the mul-
The brake system is still functioning nor-
mally but without the ABS available.
tifunction display (୴ page 337).
̈
Have the system checked at an autho-
rized Mercedes-Benz Center as soon as
possible.
If the ABS control unit is malfunctioning,
other systems such as Parktronic*,
Distronic*, and the automatic transmission
may also be malfunctioning.
Failure to follow these instructions increas-
es the risk of an accident.
The charging voltage has fallen below
̈ Switch off electrical consumers that are
currently not needed, e.g. seat heat-
ing*.
10
volts and the ABS has switched off.
The battery may not be charged sufficiently.
̈
If necessary, have the generator
(alternator) and battery checked.
When the voltage is above this value again,
the ABS is operational again.
328
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz CL65 AMG, Mercedes-Benz W215 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)