Operation
Engine compartment
Other display messages
If you see the message:
!
If the SmartKey or KEYLESS-GO*
start/stop button (୴ page 35) is not in po- NOT WHEN ENGINE ON
sition 2, the following message will appear:
ENGINE OIL LEVEL
Excess oil must be siphoned or drained
off. It could cause damage to the en-
gine and catalytic converter not cov-
ered by the Mercedes-Benz Limited
Warranty.
̈
̈
Turn off the engine.
FOR ENGINE OIL LEVEL
SWITCH IGNITION ON
If the engine is at operating tempera-
ture, wait 5 minutes before checking
oil.
̈
Switch on the ignition (୴ page 34).
i
If you see the message:
̈ If the engine is not at operating temper-
ature yet, you must wait 30 minutes be-
fore checking oil.
Perform the engine oil level check with
the dipstick (CL 500 and CL 55 AMG
only) if it cannot be completed with the
control system.
PERF. SERV. ON TIME
̈
If engine is at operating temperature,
wait 5 minutes before repeating check
procedure.
If there is excess engine oil with the engine
at normal operating temperature, the fol-
lowing message will appear:
In this case we recommend that you
have the system checked at a
Mercedes-Benz Center.
̈
If engine is not at operating tempera-
ture yet, wait 30 minutes before re-
peating check procedure.
ENGINE OIL LEVEL
REDUCE OIL LEVEL
For more information on messages in the
multifunction display concerning engine
oil, see the “Practical hints” section
̈
Have excess oil siphoned or drained
off. Contact an authorized
Mercedes-Benz Center.
(
୴ page 351).
276
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz CL65 AMG, Mercedes-Benz W215 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |