Controls in detail
Power tilt/sliding sunroof
୴
୴
i
Stopping the power tilt/sliding sunroof
during Express-operation
̈ Switch on the ignition (୴ page 34).
The selecting a tilt/sliding sunroof
opening position feature is activated
for Canada vehicles, but deactivated
for U.S. vehicles at the factory. If you
wish to have it activated, contact an au-
thorized Mercedes-Benz Center.
Press and hold the sunroof switch in
the direction of arrow 1 until the
tilt/sliding sunroof is fully raised at the
rear.
̈
̈
Move the switch in any direction.
i
If the movement of the tilt/sliding sun-
roof is blocked during the closing pro-
cedure, the sunroof will stop and
reopen slightly.
Keep holding the sunroof switch in the
direction of arrow 1 for approximately
1 second.
To select a tilt/sliding sunroof opening
position, press the sunroof switch to
the resistance point and release it
when the tilt/sliding sunroof has
reached the desired position. The
tilt/sliding sunroof now opens to the
position set when the sunroof switch is
pressed past the resistance point in the
“open” direction.
̈
Check the Express-open feature
(
୴ page 203).
Synchronizing the power tilt/sliding
sunroof
If the tilt/sliding sunroof opens com-
pletely, the sunroof is synchronized.
Otherwise repeat the above steps.
The tilt/sliding sunroof must be synchro-
nized
ț
ț
ț
ț
after the vehicle battery has been
disconnected or discharged
after the tilt/sliding sunroof has been
closed manually (୴ page 375)
the tilt/sliding sunroof does not open
smoothly
after a malfunction
204
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz CL65 AMG, Mercedes-Benz W215 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)