Controls in detail
Automatic transmission
Shifting procedure
i The current gear selector lever position P,
R, N, or D appears in the multifunction display
! Allow engine to warm up under low load use.
Do not place full load on the engine until the
operating temperature has been reached.
(୴ page 164).
The automatic transmission selects indi-
vidual gears automatically, depending on:
Shift into reverse gear R or park position P only
when the vehicle is stopped.
Warning!
G
ț
gear selector lever position D
(୴ page 164) with gear ranges
When the gear selector lever is in drive
position D, you can influence transmission
shifting by:
It is dangerous to shift the gear selector
lever out of park position P or neutral
position N if the engine speed is higher than
idle speed. If your foot is not firmly on the
brake pedal, the vehicle could accelerate
quickly forward or reverse. You could lose
control of the vehicle and hit someone or
something. Only shift into gear when the
engine is idling normally and when your right
foot is firmly on the brake pedal.
(୴ page 167)
ț
ț
ț
transfer case position (HIGH or LOW)
(୴ page 170)
limiting the gear range
changing gears manually
ț
ț
the position of the accelerator pedal
(୴ page 166)
the vehicle speed
163
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)