Controls in detail
Climate control
Activating
Residual heat and ventilation
Activating
Moist air can fog up the windows. You can
dehumidify the air with the air condition-
ing.
̈ Turn the SmartKey in the starter switch
to position 0 or 1 (୴ page 39).
With the engine switched off, it is possible
to continue to heat or ventilate the interior
for up to 30 minutes. This feature makes
use of the residual heat produced by the
engine.
or
̈
Press button9 (୴ page 183) once
̈
Remove the SmartKey from the starter
switch.
more.
The indicator lamp on the button
comes on.
i How long the system will provide heating
̈
Press button9 (୴ page 183).
depends on
The indicator lamp on the button
comes on.
The air conditioning uses the refrigerant
R134a. This refrigerant is free of CFCs
which are harmful to the ozone layer.
ț
ț
the coolant temperature
the battery voltage
Regardless of the temperature and air volume
set on the climate control panel, an interior
temperature is aimed at by 72°F (22°C) and the
blower runs on low speed to protect the vehicle
battery.
Deactivating
!
If the air conditioning cannot be turned on
̈
Press button9 (୴ page 183) once
more.
again, this indicates that the air conditioning is
losing refrigerant. The compressor has turned
itself off.
The indicator lamp on the button goes
out.
Have the air conditioning checked at the nearest
authorized Mercedes-Benz Light Truck Center.
i The residual heat is automatically turned off:
ț
ț
ț
ț
when the ignition is switched on
after about 30 minutes
if the coolant temperature is too low
if the battery voltage drops
190
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)