Getting started
Driving
Intermittent wiping
̈ Turn the combination switch to
position I.
Single wipe
Only switch on intermittent wiping under
wet weather conditions or in the presence
of precipitation.
̈ Press the combination switch briefly in
direction of arrow 1 to the resistance
point.
After the initial wipe, pauses between
wipes are automatically controlled by
the rain sensor.
When you select intermittent wiping, the
rain sensor is activated. The rain sensor
automatically sets a suitable wiping
interval depending on the wetness of the
sensor surface.
The windshield wipers wipe one time
without washer fluid.
i Intermittent wiping is interrupted when the
vehicle is at a standstill and a front door is
opened. This protects persons getting into or out
of the vehicle from being sprayed.
Wiping with windshield washer fluid
̈
Push the combination switch in direc-
tion of arrow 1 past the resistance
point.
Intermittent wiping will be continued when all
doors are closed and
!
Do not leave windshield wipers in intermit-
tent setting when the vehicle is taken to an auto-
matic car wash or during windshield cleaning.
Windshield wipers will operate in the presence of
water sprayed on the windshield, and windshield
wipers may be damaged as a result.
ț
ț
the gear selector lever is in drive position D
or reverse gear R
The windshield wipers operate with
washer fluid.
or
the wiper setting is changed using the
combination switch
i To prevent smears on the windshield, or
noisy/chattering wiper blades, wipe with wind-
shield washer fluid every now and then even
when it is raining.
For information on filling up the washer
reservoir, see “Windshield/rear window
washer system and headlamp cleaning
system” (୴ page 275).
59
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)