Operation
Engine compartment
̈
If necessary, add engine oil
̈ If the engine is not at operating
temperature yet, wait 30 minutes
before repeating check procedure.
̈ Have excess oil siphoned or drained
off. Contact an authorized
Mercedes-Benz Light Truck Center.
(୴ page 273).
For more information on engine oil, see the
“Technical data” section (୴ page 423) and
If you see the message:
!
Excess oil must be siphoned or drained off.
(୴ page 425).
It could cause damage to the engine and/or
catalytic converter not covered by the
Mercedes-Benz Limited Warranty.
Engine oil
level
Not with
Other display messages
If the SmartKey is not turned to position 2 engine on
i G 500 only:
in the starter switch, the following
message will appear:
Perform the engine oil level check with the oil
dipstick if it cannot be completed with the
control system (୴ page 272).
̈
̈
Turn off the engine.
If the engine is at operating
temperature, wait 5 minutes before
checking oil.
Switch
In this case we recommend that you have the
system checked at a Mercedes-Benz Light Truck
Center.
ignition on to
check engine
oil level
̈
If the engine is not at operating
temperature yet, you must wait
For more information on messages in the
multifunction display concerning engine
oil, see the “Practical hints” section
̈
Switch on the ignition (୴ page 39).
30
minutes before checking oil.
If you see the message:
If there is excess engine oil with the engine
at operating temperature, the following
message will appear:
(
୴ page 351).
Observe
waiting time
̈
If the engine is at operating
temperature, wait 5 minutes before
repeating check procedure.
Engine oil
level
Reduce oil
level
271
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)