Practical hints
Flat tire
̈
̈
Press the jack piston in again and close
the lowering screw (୴ page 392).
Warning!
G
Store the jack in the designated
storage compartment (୴ page 367).
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
̈ After changing the wheel, secure the
damaged wheel on the spare wheel
carrier (୴ page 369). Make sure the
wheel cannot come loose.
96 lb-ft (130 Nm).
̈
Disassemble the pump handle
(
୴ page 392).
̈
Check the tire inflation pressure and
correct it if necessary.
1
- 5 Wheel bolts
̈
̈
Put the pump handle and the wheel
wrench back into the vehicle tool kit.
̈
Tighten the five wheel bolts evenly,
following the diagonal sequence illus-
trated (1 to 5), until all wheel bolts
are tight. Observe a tightening torque
of 96 lb-ft (130 Nm).
Follow recommended cold tire inflation
pressures listed on the Tire and
Loading Information placard on the
driver’s door B-pillar (୴ page 280).
Store the vehicle tool kit in the
designated storage compartment
(୴ page 366).
395
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)