Controls in detail
Transfer case
Messages in the multifunction display
ț TC shift procedure canceled
i If the SmartKey is in starter switch
position 0 or1, an alarm will sound if the
transfer case is in neutral and the driver’s door is
opened.
If a shift was not completed and one of the
following messages appears in the multi-
function display:
The shift did not take place.
̈
Repeat the shift procedure.
Engage the transfer case to gear position HIGH
or LOW.
ț Transfer case Visit workshop
ț TC shift conditions not fulfilled
There may be a malfunction in the
system.
The shift did not take place. At least
one shift condition was not met.
For more information, see “Practical hints”
section (୴ page 363).
̈
̈
Repeat the shift procedure.
̈
Repeat the shift procedure.
If the shift procedure still does not take
place, have the vehicle checked at an
authorized Mercedes-Benz Light Truck
Center as soon as possible.
ț TC in neutral
The shift did not take place. The
transfer case is in neutral. Gear
positionN appears in transfer case
indicator 1.
̈
Repeat the shift procedure.
Warning!
G
If the transfer case is in neutral, transmis-
sion position P will not hold vehicle. The
parking brake must be applied to hold
vehicle in place.
172
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)