Practical hints
Jump starting
The jump-start terminals are located on
the driver’s side of the engine compart-
ment.
̈ Start the engine of the vehicle with the
charged battery and run at idle speed.
Warning!
G
̈
Connect negative terminal 3 and the
negative terminal of the charged
Keep flames or sparks away from battery.
Do not smoke.
battery with the jumper cable. Clamp
the cable to the charged battery first.
Observe all safety instructions and precau-
tions when handling automotive batteries
̈
Start the engine of the disabled
vehicle.
(୴ page 396).
You can now turn on the electrical con-
sumers. Do not switch on the headlamps
under any circumstances.
̈
Make sure the two vehicles do not
touch.
̈
̈
Apply the parking brake (୴ page 62).
̈
Remove the jumper cables first from
the negative terminals on each battery
and then from the positive terminals on
each battery.
1 Cover
2 Positive (+) terminal
Move the gear selector lever to park
position P.
3
Negative (-) terminal
̈
̈
Turn off all electrical consumers.
̈
Open cover 1 of the positive terminal
Open the hood (୴ page 267).
You can now switch on the headlamps.
of both vehicles.
̈
Have the battery checked at the
nearest authorized Mercedes-Benz
Light Truck Center.
!
Never invert the terminal connections!
̈
Connect positive terminal 2 and the
positive terminal of the charged battery
with the jumper cable. Clamp the cable
to the charged battery first.
400
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)