Practical hints
Flat tire
Mounting the new wheel
̈ Push the wheel onto the wheel hub and
Lowering the vehicle
press firmly.
̈
Clean contact surfaces of wheel and
wheel hub.
̈ Using the pump handle, turn the
release bolt of the jack counter-
clockwise approximately one turn
̈ Insert wheel bolts and tighten them
slightly.
!
against hub and hold it there while installing first
wheel bolt.
To avoid paint damage, place wheel flat
(
୴ page 392).
Warning!
G
i Never turn the release bolt of the jack more
than one or two revolutions. Otherwise hydraulic
fluid can escape.
Warning!
G
Only use genuine Mercedes-Benz wheel
bolts. Other wheel bolts may come loose.
̈
Lower the vehicle until it is resting fully
on its own weight.
Always replace wheel bolts that are
damaged or rusted.
Do not tighten the wheel bolts when the
vehicle is raised. Otherwise the vehicle
could tip over.
̈
Remove the jack.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be
repaired immediately. Do not continue to
drive under these circumstances! Contact
an authorized Mercedes-Benz Light Truck
Center.
Incorrect wheel bolts or improperly tight-
ened wheel bolts can cause the wheel to
come off. This could cause an accident.
Make sure to use the correct wheel bolts.
394
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)