164_AKB;
d2ureepe,
6; 2, en-US
2009-03-25T14:36:45+01:00 - Seite 105
Version: 2.11.8.1
Driving and parking
105
X Make sure the KEYLESS-GO start/stop
X Start the engine with the SmartKey as radio
signals from another source may be
interfering with the KEYLESS-GO function.
X Repeat the starting procedure.
button is inserted in the starter switch
(
Y page 79).
i To start the engine with the SmartKey
instead of the KEYLESS-GO function,
If the engine does not start after several
remove the KEYLESS-GO start/stop button starting attempts:
from the starter switch. Proceed as
X Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.
described in “With SmartKey”
(Y page 104).
The engine does not start. You cannot
hear the starter.
X Depress the brake pedal during the starting
procedure.
The battery may not be charged sufficiently.
X Do not depress the accelerator pedal.
X Get a jump start (Y page 338).
X Gasoline engine: Press the KEYLESS-GO
start/stop button once.
The engine starts automatically.
If the engine will not start despite a jump
start:
X Diesel engine: Press the KEYLESS-GO
start/stop button once.
X Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.
The engine preglows and starts
automatically.
The starter has been exposed to excessive
temperatures.
X Let the starter cool for about 2 minutes.
X Repeat the starting procedure.
i If the engine is at operating temperature,
the time the engine needs to preglow is
reduced.
If the engine does not start after several
starting attempts:
Starting difficulties
X Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.
!
Remember that extended starting
attempts can drain the battery.
The engine does not start. You can hear
the starter.
There could be a malfunction in the engine
electronics or in the fuel supply system.
Driving off
G Warning!
On slippery road surfaces, never downshift in
order to obtain braking action. This could
result in drive wheel slip and reduced vehicle
control. Your vehicle’s ABS will not prevent
this type of loss of control.
Carry out the following steps:
X If you are starting the engine with the
SmartKey: Turn the SmartKey in the starter
switch to position 0 and repeat the starting
procedure.
X If you are starting the engine with KEYLESS-
GO: Close any doors that may be open to
allow for better detection of the SmartKey.
or
X Remove the KEYLESS-GO start/stop
button from the starter switch.
!
Do not run a cold engine at high engine
speeds. Running a cold engine at high
engine speeds may shorten the service life
of the engine. This is not covered by the
Mercedes-Benz Limited Warranty.
ML 63 AMG: At engine temperatures below
68‡
(20†), the engine’s maximum speed
Z
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML350, Mercedes-Benz ML350 BlueTec, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2010 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |