164_AKB;
d2ureepe,
6; 2, en-US
2009-03-25T14:36:45+01:00 - Seite 149
Version: 2.11.8.1
Driving systems
149
X Increasing: Briefly lift the cruise control
lever up past the resistance point in
direction of arrow: (Y page 147).
engage the parking brake. In this case, the
cruise control speed segments in the
speedometer dial will go out.
X Decreasing: Briefly press the cruise
control lever down past the resistance
point in direction of arrow;
The Distronic also switches off automatically
when
Rthe vehicle speed falls below 20 mph
(
Y page 147).
(30
km/h)
X Release the cruise control lever.
The new speed is set and the vehicle will
accelerate or decelerate. Keep in mind that
it may take a brief moment until the vehicle
has reached the set speed.
Rthe ESP® is in operation
Rthe ESP® is switched off with the ESP®
switch
Rthe ESP® has switched off due to a
malfunction
Setting stored speed (Resume function)
Ryou shift the automatic transmission into
G Warning!
neutral position N while driving
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from returning to the preset speed
could cause an accident and/or serious injury
to you and others.
The cruise control speed segments in the
speedometer dial goes out and an acoustic
warning will sound. Observe additional
messages in the multifunction display that
may appear.
G Warning!
Distronic switches off and releases the brakes
when the vehicle decelerates below the
minimum speed of 20 mph (30 km/h) by
operation of the system. At that time the
driver must apply the brakes in order to
reduce vehicle speed further or bring it to a
stop.
X Briefly pull the cruise control lever in
direction of arrow? (Y page 147).
If no speed is stored, the current speed is
set and stored.
X Remove your foot from the accelerator
pedal.
Depressing the accelerator pedal does not
deactivate the Distronic. After a brief
acceleration (e.g. for passing), the Distronic
will resume the last set speed.
Deactivating Distronic
X Depress the brake pedal.
or
X Briefly push the cruise control lever in
direction of arrow= (Y page 147).
The cruise control speed segments in the
speedometer dial will go out and the
following message appears briefly in the
multifunction display:DISTRONIC Off
The last set speed is stored for later use.
The last stored speed is deleted from memory following distance to the preceding vehicle.
when the engine is turned off.
Setting the following distance in
Distronic
You can set the specified following distance
for Distronic by varying the time setting
between 1.0 and 2.0 seconds. Using this time
setting and the current speed of your vehicle,
Distronic calculates and sets the required
The set distance will be shown in the
multifunction display.
The Distronic switches off automatically
when you depress the brake pedal or you
Z
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML350, Mercedes-Benz ML350 BlueTec, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)