164_AKB;
d2ureepe,
6; 2, en-US
2009-03-25T14:36:45+01:00 - Seite 339
Version: 2.11.8.1
Jump starting
339
power by an external battery or starter
pack.
RAlways make sure the jumper cables are
not on or near pulleys, fans or other parts
that move when an engine is started or
running.
RJump starting should only be performed
when the engine and catalytic converter32
are cold.
RShould the battery be drained completely,
let the donating power source charge the
vehicle for several minutes before
RDo not start the engine if the battery is
frozen. Let the battery thaw out first.
reattempting the starting process.
ROnly jump start from batteries with the
same voltage rating (12 V). Jump starting
with a more powerful battery could damage
the vehicle’s electrical system. Such
damage will not be covered by the
The jump-start contacts are located in the
engine compartment on the passenger side.
X Make sure the two vehicles do not touch.
X Switch off all electrical consumers.
X Engage the parking brake.
Mercedes-Benz Limited Warranty.
ROnly use jumper cables with sufficient
cross-section and insulated terminal
clamps.
X Make sure the automatic transmission is in
park position P.
X Open the hood (Y page 215).
PositionC represents the charged battery of X Connect positive terminal; of charged
another vehicle or an equivalent starter pack.
batteryC with positive terminal= with a
jumper cable. Clamp the cable to positive
terminal; of charged batteryC first.
X Flip up cover: of positive terminal=
in
direction of arrow.
X Start engine of the vehicle with charged
batteryC and run at idle speed.
!
Never invert the terminal connections!
32
Vehicles with gasoline engine only.
Z
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML350, Mercedes-Benz ML350 BlueTec, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)