164_AKB;
d2ureepe,
6; 2, en-US
2009-03-25T14:36:45+01:00 - Seite 192
Version: 2.11.8.1
Loading and storing
192
tie-down rings in the cargo compartment
X Hook belt hook: into cargo tie-down
ring; in direction of arrow.
(
Y page 188).
X Open the hook and loop fasteners on the
cargo net package.
X Roll out the cargo net.
X Unfold the cargo net.
X Engage the upper cargo net bar.
The cargo net bar must engage audibly.
X Pull tightening belt= by the loose end in
direction of arrow until the cargo net is
pulled tight.
X After driving a short distance, make sure
the cargo net is still tight and, if necessary,
pull it tight again.
Loosening the cargo net
Installing the cargo net
Belt hook attached behind the rear seat backrests
Cargo net installed behind the C-pillar
X Loosen the tightening belt by pulling
buckle: upward in direction of arrow.
X Remove belt hook; from cargo tie-down
ring=.
X Hang cargo net bar; on holder:
indicated by the arrow.
X Push cargo net bar; forward into
holder: in direction of arrow.
X Engage lower cargo net bar.
as
Removing and storing the cargo net
The cargo net bar must engage audibly.
X Take cargo net bar; (Y page 192) out of
holder: (Y page 192).
Pulling the cargo net tight
X Press the red button on the upper and lower
cargo net bar.
X Fold the cargo net.
X Roll up the cargo net.
X Close the hook and loop fasteners on the
cargo net package.
Front storage compartments
G Warning!
Belt hook attached behind the rear seat backrests
To help avoid personal injury during a collision
or sudden maneuver, exercise care when
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML350, Mercedes-Benz ML350 BlueTec, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)