164_AKB;
d2ureepe,
6; 2, en-US
2009-03-25T14:36:45+01:00 - Seite 94
Version: 2.11.8.1
Lighting
94
The following lamps come on and go out
depending on the brightness of the ambient
light with the SmartKey in starter switch
position 1 or the KEYLESS-GO start/stop
button pressed once:
Canada only
With the exterior lamp switch in position
orÃ, you cannot switch on the high-
beam headlamps.
The high-beam flasher is available at all times.
$
Rtail lamps
X For nighttime driving turn the exterior lamp
switch to positionL to permit activation
of the high-beam headlamps.
Rparking lamps
Rlicense plate lamps
Rside marker lamps
When the engine is running, and you
Rshift from a driving position to park
position P with the vehicle at a standstill or
the parking brake is engaged, the low-beam
headlamps will go out with a delay of
When the engine is running, the low-beam
headlamps will also come on and turn off
automatically.
Canada only: High-beam headlamps are only
available with the exterior lamp switch in
positionL.
3
minutes
Rturn the exterior lamp switch to position
T, the low-beam headlamps, the tail
and parking lamps, the license plate lamps
and the side marker lamps come on
Daytime running lamp mode
In Canada, the daytime running lamp mode is
mandatory and therefore in a constant mode.
In the USA, the daytime running lamp mode
is deactivated by default.
Rturn the exterior lamp switch to position
L, the manual headlamp mode has
priority over the daytime running lamp
mode
X Activate the daytime running lamp mode
using the control system, see “Switching
daytime running lamp mode on or off (USA
only)” (Y page 133).
The corresponding exterior lamps come on
(
Y page 92).
USA only
X Turn the exterior lamp switch to position
$
You can only switch on the high-beam
headlamps in low ambient lighting conditions.
orÃ.
When the engine is running, the low-beam The high-beam flasher is available at all times.
headlamps come on.
In low ambient lighting conditions, the
following lamps will come on additionally:
X For nighttime driving turn the exterior lamp
switch to positionL orà to permit
activation of the high-beam headlamps.
RTail lamps
When the engine is running, and you turn the
exterior lamp switch to positionT or
L, the manual headlamp mode has
priority over the daytime running lamp mode.
RParking lamps
RLicense plate lamps
RSide marker lamps
The corresponding exterior lamps come on
With the daytime running lamp mode
(Y page 92).
activated and the engine running, you cannot
switch off the low-beam headlamps manually. Fog lamps
Fog lamps cannot be switched on with the
exterior lamp switch in positionÃ.
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML350, Mercedes-Benz ML350 BlueTec, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)