164_AKB;
d2ureepe,
6; 2, en-US
2009-03-25T14:36:45+01:00 - Seite 148
Version: 2.11.8.1
Driving systems
148
After approximately 5 seconds the currently Changing the set speed
set speed appears in the status indicator of
the multifunction display:
G Warning!
Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
RUSA only: e.g.DTR 55 Miles
RCanada only: e.g.DTR 90 km/h
If the Distronic is not activated after the
cruise control lever is pulled in direction of
arrow? (Y page 147), you will see the
messageDISTRONIC Off in the
multifunction display.
Increase or decrease the set vehicle speed to
a value that the prevailing road conditions and
legal speed limits permit. Otherwise, sudden
and unexpected acceleration or deceleration
of the vehicle could cause an accident and/
or serious injury to you and others.
In the following cases you cannot activate the
Distronic:
You can increase or decrease the set speed
in 1 mph (Canada: 1 km/h) increments or in
Rup to 2 minutes after starting the engine
Rwhen you brake
5
mph (Canada: 10 km/h) increments.
When you use the cruise control lever to
decelerate, the brake system will brake the
Rwhen you have engaged the parking brake
Rwhen the automatic transmission is in park vehicle automatically if the engine’s braking
position P, reverse gear R, or neutral
position N
power does not brake the vehicle sufficiently.
Adjustment in 1 mph (Canada:
1 km/h) increments
Rwhen the ESP® is switched off or has
switched off due to a malfunction
i The set speed value is increased or
decreased in 1 mph (Canada: 1 km/h)
increments each time you lift or press the
cruise control lever up or down to the
resistance point.
The vehicle speed displayed on the
speedometer can briefly vary from the speed
setting on the Distronic system.
Setting the current speed
X Increasing: Briefly lift the cruise control
lever up to the resistance point in direction
of arrow: (Y page 147).
X Decreasing: Briefly press the cruise
control lever down to the resistance point
in direction of arrow; (Y page 147).
X Release the cruise control lever.
The new speed is set and the vehicle will
accelerate or decelerate.
X Accelerate or decelerate to the desired
speed.
X Briefly lift the cruise control lever in
direction of arrow: or depress in
direction of arrow; (Y page 147).
X Remove your foot from the accelerator
pedal.
i If you do not take your foot off of the
accelerator pedal and continue to
accelerate past the set speed, the following
message will appear in the multifunction
display:
Adjustment in 5 mph (Canada:
10
km/h) increments
i The set speed value is increased or
decreased in 5 mph (Canada: 10 km/h)
increments each time you lift or press the
cruise control lever up or down past the
resistance point.
DISTRONIC Override
The distance to a slower moving vehicle in
front of you will not be set. Your vehicle
speed will then be determined only by the
accelerator pedal position.
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML350, Mercedes-Benz ML350 BlueTec, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)