164_AKB;
d2ureepe,
6; 2, en-US
2009-03-25T14:36:45+01:00 - Seite 361
Version: 2.11.8.1
Fuels, coolants, lubricants, etc.
361
Viscosity grades for engine oils
Approved engine oils
Engine oils are specifically tested for their
Using the chart below, select oil viscosity
suitability in our engines and durability for our according to the lowest air temperature
expected before the next oil change.
service intervals. Therefore, only use
approved engine oils and oil filters required
for vehicles with the Maintenance System.
For a listing of approved engine oils and oil
filters, contact an authorized Mercedes-Benz
Center or visit www.mbusa.com (USA only).
!
Using engine oils and oil filters of a
specification other than those expressly
required for the Maintenance System, or
changing of oil and oil filter at change
intervals longer than those called for by the
Maintenance System will result in engine or
emission control system damage not
covered by the Mercedes-Benz Limited
Warranty.
Please follow Maintenance System
recommendations for scheduled oil
changes. Failure to do so will result in
engine or emission control system damage
not covered by the Mercedes-Benz Limited
Warranty.
Engine oil additives
!
Do not blend oil additives with engine oil.
They may damage the engine. Damage or
malfunctions resulting from blending oil
additives are not covered by the Mercedes-
Benz Limited Warranty.
Mercedes-Benz recommends MOBIL OIL.
Air conditioning refrigerant
Use the table below to determine the
MB sheet number.
R134a (HFC) refrigerant and special PAG
lubricating oil are used in the air conditioning
system.
Model
Engine,
type
MB sheet
number
!
Never use R 12 (CFC) or mineral-based
lubricating oil. Otherwise damage to the
system will occur.
ML 350 BlueTEC
4MATIC
642
229.51
ML 350 4MATIC
ML 350
272
272
229.5
Brake fluid
229.3/
229.5
G Warning!
ML 550 4MATIC
ML 63 AMG
273
156
229.5
During vehicle operation, the boiling point of
the brake fluid is continuously reduced
through the absorption of moisture from the
atmosphere.
229.561
Under extremely strenuous operating
conditions, this moisture content can lead to
i MB sheet numbers are printed on the
outside of oil containers.
61
Restriction: Only SAE 0W-40/SAE 5W-40 engine oils may be used.
Z
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML350, Mercedes-Benz ML350 BlueTec, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)