164_AKB;
d2ureepe,
6; 2, en-US
2009-03-25T14:36:45+01:00 - Seite 217
Version: 2.11.8.1
Engine compartment
217
For more information on engine oil, see
“Fuels, coolants, lubricants etc.”
(
Y page 358).
For information on messages in the
multifunction display concerning engine oil,
see the “Practical hints” section
(
Y page 293).
Adding engine oil
Only use approved engine oils and oil
!
Example illustration: Gasoline engine
filters required for vehicles with
Maintenance System. For a listing of
approved engine oils and oil filters, contact
an authorized Mercedes-Benz Center or
visit www.mbusa.com (USA only).
The following will result in engine or
emission control system damage not
covered by the Mercedes-Benz Limited
Warranty:
RUsing engine oils and oil filters of
specification other than those expressly
required for the Maintenance System.
Example illustration: Diesel engine
RChanging of oil and oil filter at change
intervals longer than those called for by
the Maintenance System.
X Pull out oil dipstick:.
X Wipe oil dipstick: clean.
X Fully insert oil dipstick: into the dipstick
guide tube.
RUsing any oil additives.
X Pull out oil dipstick: again after
approximately 3 seconds to obtain
accurate reading.
The oil level is correct when it is between
lower (min) mark= and upper (max)
mark; of oil dipstick:.
i All models (except ML 63 AMG):
The filling quantity between the upper and
lower marks on the oil dipstick is
approximately 2.1 US qt. (2.0 l).
Example illustration: ML 350 BlueTEC (ML 350,
ML 550 similar)
ML 63 AMG:
The filling quantity between the upper and
lower marks on the oil dipstick is
approximately 1.6 US qt. (1.5 l).
X If necessary, add engine oil.
Z
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML350, Mercedes-Benz ML350 BlueTec, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)