Trip computer & overspeed warning
TRIP COMPUTER OVERSPEEDWARNING
The overspeed warning function is an aid to
keeping within speed limits, and is selected by
pressing switch 2 (’bell’symbol).
To set the speed limit, press the switch (once
or twice) until ’SPEEDLIMIT- - -’is displayed,
and then hold the switch until the required
speed appears in the display(speeds will
scrollupwards in increments from 30 km/h to
140
km/h.
NOTE: The displaywill start scrolling from
which ever speed was previouslyset in the
system memory.
Resetting the trip computer
With the starter switch turned to position ’II’,
press and hold switch 1 for at least 2
seconds:
As soon as the required speed appears in the
display, release the switch. That speed will
then be set in the system memory.
Whilst driving, if you exceed the pre-set
speed, ’SPEEDLIMIT- - -’will be displayed in
the message centre and an audible warning
will sound.
•
Distance To Empty and Average Fuel
Consumption functions both reset. The
displaywill show ’COMPUTINGRANGE’
and ’COMPUTINGL/100 KM’until a
distance of 1 kilometre has been travelled,
after which the computer will once again
be able to calculate an average fuel
consumption figure.
To cancelthe speed you have set, press
switch 2 again (the message ’SPEEDLIMIT
OFF’will appear).
•
•
Average Speed is reset. The displaywill
show ’COMPUTINGKPH’until the vehicle
has travelled far enough (1 kilometre) for
an average speed to be available.
Trip Distance Two function resets to zero
NOTE: The Trip Distance One function is not
affected by resetting the trip computer.
118
Categories | Range Rover |
---|---|
Tags | Land Rover |
Model Year | 1998 |
Download File |
|
Language | English |
Product Brand | Land Rover |
Applicable to Country | Australia |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)