1998 Land Rover Owners Manual

Wheel changing
WARNING
Ensure the jack is positioned on firm,
level ground.
DONOTuse  the jack to raise the vehicle
until you have carefully read and
understood ’Positioning the jack’ later in
this section. If in doubt, consult your
dealer.
Care must be taken to avoid accidental
contact with any underbody parts,
especially the hot exhaust system
components, likely to cause personal
injury during raising or lowering of the
vehicle.
Ensure that the space under and around
the vehicle is free from obstruction as it
is lowered.
Operating the jack
Slot the two parts of the jacklever together,
ensuring that the spring clip protrudes from
the engagement slot where the two parts join
(see inset ’A’). Close the jackrelease valve by
using the notched end of the jacklever to turn
the valve fully clockwise (see inset ’B’). Insert
the lever into the socket as shown (inset ’C’)
and twist the lever to lock it into the socket.
Pump the lever up and down to raise the jack.
To lower the jack, withdraw the lever and slot
the notched end over the pegs on the release
valve. Slowly turn the release valve
anti-clockwise, allowing the weight of the
vehicle to lower the jack.
149
Product Specification
CategoriesRange Rover
Tags
Model Year1998
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 200 pages
LanguageEnglish
Product BrandLand Rover
Applicable to CountryAustralia
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field