Wheel changing
•
Lower the vehicle and remove the jackand
wheel chocks.
•
Fullytighten the wheel nuts and replace
the locking wheel nut cover. DONOT
OVERTIGHTENby using foot pressure or
extension bars on the wheel brace. Check
the wheel nut torque at the earliest
opportunity (see ’Generaldata’).
•
REMEMBER to change to ’H’(high range)
before driving.
•
Finally, checkthe tyre pressure (see
’Generaldata’).
Care of the jack
Examine the jackoccasionally;clean and
grease the moving parts, particularlythe ram,
to prevent corrosion.
Replacing the spare wheel
Preferablyclean and dry the wheel before
stowing it in the vehicle.
To avoid contamination, the jackshould
always be stowed in its fully closed position.
Lay the webbing flat across the lower tailgate
and place the wheel face down with the rear
edge of the tyre in line with the mark on the
webbing.
Wheel centre cap
After fitting the spare wheel, it will be
necessary to remove the centre cap from the
replaced road wheel in order to stow the
wheel in the spare wheel compartment.
Grasp the webbing loop, raise the wheel from
the tailgate, and lower into position, then fit
and tighten the wheel securing nut.
Using a suitable blunt implement (the handle
of a large screwdriver, for example) apply light
pressure to the rear of the cap. Use hand
pressure only to replace the cap.
WARNING
After wheel changing always secure tools,
chocks, jack and spare wheel in their correct
storage positions.
152
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Language | English |
| Product Brand | Land Rover |
| Applicable to Country | Australia |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)