Door mirrors
Automatic dipping for reverse gear selection
(if fitted)
Vehicles with a driver’s seat memory have a
pre-stored function which causes the mirrors
to dip automaticallywhenever reverse gear is
selected. If necessary the mirror positions can
be altered as follows:
1.
Turn the starter switch to position ’I’or ’II’
(do not start the engine).
2.
3.
Select reverse gear.
Adjust either or both mirrors to the
desired positions.
4.
Press the seat MEMORYSTOREswitch
together with either switch 1 or 2
(whichever corresponds with the driver’s
seat memory) for 2 seconds (the message
centre displays ’MIRRORDIP STORE’).
ELECTRICALLY-OPERATEDDOORMIRRORS
1.
Slide the switch left or right to select the
appropriate mirror.
2.
With the starter switch turned to position
’I’or ’II’, press the appropriate side of the
rocker switch to tilt the mirror glass
up/down/left or right.
NOTE: If your vehicle has an
electrically-operateddriver’s seat, then the
positions of the mirrors can be set in
conjunction with the driver’s seat positions
(see ’Seats’).
NOTE: Door mirrors have integralheating
elements which disperse ice or mist from the
glass. This function operates continuously
while the engine is running.
55
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Language | English |
| Product Brand | Land Rover |
| Applicable to Country | Australia |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)