Washer jets & wiper blades
REAR WIPER BLADEREPLACEMENT
The rear wiper arm is inaccessible in its
stowed position (under a cover at the top of
the tailgate). To change the wiper blade, it is
necessary to stop the wiper arm during its
travelas follows:
Set the rear screen wiper operating, then open
the upper tailgate when the wiper is in a
near-verticalposition. The wiper will stop as
soon as the tailgate is opened.
Turn the starter switch to the ’0’position to
prevent the wiper from operating, lower the
upper tailgate and then replace the wiper
blade (as described for front wiper blade
overleaf). The wiper will continue operating as
soon as the starter switch is returned to
position ’I’.
FRONTWIPER BLADEREPLACEMENT
To renew a wiper blade, lift the wiper arm
away from the windscreen, press the retaining
clip (1) and slide the wiper blade down the
arm to remove.
Locate the new blade assembly on the arm
and push into engagement until the blade is
retained by the clip.
Always fit replacement wiper blades that are
identicalto the originalspecification.
142
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Language | English |
| Product Brand | Land Rover |
| Applicable to Country | Australia |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)