Door mirrors
To disable the dip function:
Turn the starter switch to position ’I’or ’II’(do
not start the engine) and select reverse gear.
Press and hold the seat MEMORYSTORE
switch for 2 seconds and the message centre
displays ’MIRRORDIP OFF’and a tone
sounds.
To restore the dip function:
Turn the starter switch to position ’I’or ’II’(do
not start the engine), and select reverse gear.
Press and hold the MEMORYSTOREswitch
for 2 seconds and the message centre briefly
displays the message ’MIRRORDIP ON’
(returning mirrors to, either the factoryor
your own pre-set positions).
Manual adjustment
Each door mirror assembly can be moved
through four positions.
The fully forward and rearward positions
enable the mirror body to fold almost flat
against the side of the vehicle and are useful
for negotiating narrow openings. The two
intermediate positions enable the mirror body
to be adjusted to suit the differing
requirements of either the passenger or
driver’s side of the vehicle - the forward
intermediate position should be used for the
driver’s side, and the rear intermediate
position used for the passenger side.
56
Product Specification
Categories | Range Rover |
---|---|
Tags | Land Rover |
Model Year | 1998 |
Download File |
|
Language | English |
Product Brand | Land Rover |
Applicable to Country | Australia |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |