Controls in detail
Automatic transmission
X Briefly press the gear selector lever to the Deactivating manual shift program
X Shift the automatic transmission into drive
position D (for second gear) or reverse gear
R.
X Have the automatic transmission checked
at an authorized Mercedes-Benz Center as
soon as possible.
left in the D- direction.
X Press the program mode selector switch
or
X Briefly pull left gearshift control 1
Y page 134).
repeatedly untilC orS appears in the
multifunction display.
or
X Restart the engine.
The automatic transmission will go to
automatic program mode (C or S).
(
The automatic transmission shifts into the
next lower gear.
i For maximum acceleration, press and
hold the gear selector lever to the left in the Manual program mode M is not stored.
D- direction or pull and hold the left
gearshift control. Depending on the engine
speed the automatic transmission selects
the optimal gear for maximum
Emergency operation (limp-home
mode)
acceleration.
If vehicle acceleration becomes less
responsive or sluggish or the automatic
transmission no longer shifts, the automatic
transmission is most likely operating in limp-
home (emergency operation) mode. In this
mode only second gear and reverse gear R
can be selected.
i When you brake or stop, the automatic
transmission shifts down into a gear from
which you can easily accelerate or take off.
Kickdown
X Stop the vehicle in a safe location.
X Shift the automatic transmission into park
position P.
Using the kickdown when driving in manual
program mode M is not possible.
X Turn off the engine.
X Wait at least 10 seconds before restarting.
X Restart the engine.
Z
137
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz E300, Mercedes-Benz E320 BlueTec, Mercedes-Benz E350, Mercedes-Benz E63 AMG, Mercedes-Benz W211 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)