Practical hints
Replacing bulbs
RAlways use a clean lint-free cloth when
handling bulbs.
of the vehicle. Only have the LEDs replaced
at an authorized Mercedes-Benz Center.
bulb or repair the lamp and its components.
It is recommended to have such work done
by a qualified technician.
RYour hands should be dry and free of oil and
grease.
Replacing bulbs for front lamps
RIf the newly installed bulb does not come
on, contact an authorized Mercedes-Benz
Center.
Before you start to replace a bulb for a front
lamp, do the following:
X Switch off the ignition.
i Mercedes-Benz recommends using
Longlife (LL) bulbs.
X Turn the exterior lamp switch to position
M.
Have the LEDs and bulbs for the following
lamps replaced at an authorized Mercedes-
Benz Center:
X Open the hood (Y page 241).
RAdditional turn signal lamps in the exterior
rear view mirrors
2 Bulb socket for high-beam headlamp/
high-beam flasher bulb
RBi-Xenon lamps
3
Bulb socket for parking and standing lamp
bulb
RFront fog lamps
RFront side marker lamps
4 Bulb socket for low-beam headlamp bulb
(halogen headlamps only)
RParking and standing lamps (vehicles with
Bi-Xenon headlamps only)
5
Bulb socket for front turn signal lamp bulb
RRear lamps (except license plate lamps)
RHigh-mounted brake lamp
1 Housing cover for low-beam halogen or Bi-
Xenon headlamp
Low-beam bulb (halogen headlamps
only)
G Warning!
Do not remove the cover for the Bi-Xenon
headlamp. Because of high voltage in
Xenon lamps, it is dangerous to replace the
!
Do not replace the LEDs yourself. You
could otherwise damage the LEDs or parts
X Turn housing cover 1 counterclockwise
and remove it.
X Turn bulb socket 4 with the bulb
counterclockwise and remove it.
350
Product Specification
Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz E300, Mercedes-Benz E320 BlueTec, Mercedes-Benz E350, Mercedes-Benz E63 AMG, Mercedes-Benz W211 |
Model Year | 2009 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |