Controls in detail
Starter switch positions
Starter switch positions
SmartKey
instrument cluster fails to come on when the
ignition is switched on, have it checked and
replaced if necessary. If a lamp in the
instrument cluster remains on after starting
the engine or comes on while driving, refer to Vehicles equipped with the KEYLESS-GO
“Lamps in instrument cluster” (Y page 330). feature are supplied with a SmartKey with
If the SmartKey is left in starter switch
KEYLESS-GO
G
Observe Safety notes, see
page 62.
G
Observe Safety notes, see
page 62.
integrated KEYLESS-GO function.
position 0 for an extended period of time, it
With the SmartKey present in the vehicle,
can no longer be turned in the starter switch. pressing the KEYLESS-GO start/stop button
In this case, the steering is locked. To unlock,
Rwithout the brake pedal depressed
remove SmartKey from the starter switch and
corresponds to the various starter switch
reinsert.
positions (Y page 94)
The steering is locked when the SmartKey is
Rwith the brake pedal firmly depressed will
removed from the starter switch.
start the engine (Y page 124)
!
If the SmartKey cannot be turned in the
The function of the SmartKey overrules the
KEYLESS-GO function.
The SmartKey must be located in the vehicle.
starter switch, the vehicle battery may not
be sufficiently charged.
RCheck the vehicle battery and charge it
if necessary.
Starter switch
}
$
%
&
For removing SmartKey (gear selector
lever must be in park position P)
Power supply for some electrical
consumers, e.g. radio
Ignition (power supply for all electrical
consumers) and driving position
X Make sure the automatic transmission is in
park position P.
X Do not depress the brake pedal.
RGet a jump start.
To prevent accelerated vehicle battery
discharge or a completely discharged
vehicle battery, always remove the
SmartKey from the starter switch when the
engine is not in operation.
Starting position
When you switch on the ignition, all lamps
(except low-beam headlamp indicator lamp,
high-beam headlamp indicator lamp, and turn
signal indicator lamps unless activated) in the
instrument cluster come on. If a lamp in the
94
Product Specification
Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz E300, Mercedes-Benz E320 BlueTec, Mercedes-Benz E350, Mercedes-Benz E63 AMG, Mercedes-Benz W211 |
Model Year | 2009 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |