Practical hints
Flat tire
Removing the wheel
Attaching the spare wheel
G Warning!
Vehicles with spare wheel with collapsible
tire only: Inflate collapsible tire only after
the wheel is properly attached.
Inflate the collapsible tire using the electric
air pump before lowering the vehicle.
G Warning!
Always replace wheel bolts that are
damaged or rusted.
X Turn crank 4 clockwise until jack 3
is
fully seated in take-up bracket 2 and the 1 Alignment bolt
Never apply oil or grease to wheel bolts.
jack base evenly meets the ground.
X Jack up the vehicle until the wheel is a
maximum of 1.2 in (3 cm) from the ground.
Damaged wheel hub threads should be
repaired immediately. Do not continue to
drive under these circumstances! Contact
an authorized Mercedes-Benz Center or
call Roadside Assistance.
X Unscrew uppermost wheel bolt and remove
it.
X Replace this wheel bolt with alignment bolt
1
supplied with the vehicle tool kit.
X Remove the remaining bolts.
Incorrect wheel bolts or improperly
tightened wheel bolts can cause the wheel
to come off. This could cause an accident.
Be sure to use the correct wheel bolts.
!
This could result in damage to the wheel
bolts and wheel hub threads.
Do not place wheel bolts in sand or dirt.
G Warning!
X Remove the wheel.
Only use genuine Mercedes-Benz wheel
bolts. Other wheel bolts may come loose.
Do not tighten the wheel bolts when the
vehicle is raised. Otherwise the vehicle
could fall off the jack.
362
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz E300, Mercedes-Benz E320 BlueTec, Mercedes-Benz E350, Mercedes-Benz E63 AMG, Mercedes-Benz W211 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)