Safety and security
Occupant safety
the child restraint manufacturer’s
instructions.
If the storage box is not removed
X Guide the top tether strap between the
head restraint and top of the seat back.
The head restraints must be installed (if
removable) and positioned such that the
top tether strap can pass freely between
the head restraint and top of the seat back.
X Make sure the tether strap is not twisted.
Anchorage rings 2 are located on the back
side of the rear outer seat backrests and on
the floor behind the rear center seat.
Rthe top tether anchorage ring; located
on the floor for use with a child restraint in
the rear center seat position cannot be
accessed
After removing the child restraint system and
the top tether strap.
X Reinstall anchorage ring cover 1.
Rthe hook= of the top tether strap when
attached to the anchorage ring; on an
outer rear seat backrest may push against
the storage box and prevent the seat
backrest from properly locking into
position
Wagon
G Warning!
Always lock the seat backrest in its upright
position when the rear seat bench is
occupied by passengers, after installing top
tether straps, or the extended cargo
compartment is not in use. Make sure that
seat backrest is secured properly by
pushing and pulling on the seat backrest. If
the seat backrest is not locked properly,
the seat backrest could fold. The child seat
would no longer be supported properly or
positioned to provide its intended benefit.
That could cause serious or even fatal
injuries.
X If you place a child seat in the left or center
rear seat position, remove the twin roller
blind and return the seat to its original
position.
!
Do not reinstall the twin roller blind with
a child seat and top tether installed in the
left and/or center rear seat position.
X If you place a child seat in the right rear seat
position, the twin roller blind can remain
installed if so desired.
X With a child seat and top tether installed in
the right rear seat position and the twin
roller blind installed, make sure the top
tether strap is positioned between the seat
backrest and the twin roller blind.
2 Anchorage rings
3 Hook
Prior to installing a tether strap, note the
following steps:
X Fold up anchorage ring 2.
X Securely fasten hook 3, which is part of
the top tether strap, to anchorage ring;.
X Roll up the retractable luggage cover and
the partition net.
X Remove the storage box (if so equipped).
Z
X Fold the rear seat backrest slightly forward.
67
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz E300, Mercedes-Benz E320 BlueTec, Mercedes-Benz E350, Mercedes-Benz E63 AMG, Mercedes-Benz W211 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)