238
STARTINGANDOPERATING
NOTE: Shifting into or out of 4L is possible with the
vehicle completely stopped, however difficulty may oc-
cur due to the mating clutch teeth not being properly
aligned. Several attempts may be required for clutch
teeth alignment and shift completion to occur. The pre-
ferredmethodiswiththevehiclerolling2to3mph(3to
including dry hard surfaced roads. The 4 FULL TIME
mode allows the front and rear wheels to rotate at
differentspeedswhicheliminatesdrivelinebindingand
componentwearthatisnormallyassociatedwithdriving
the vehicle in the 4 PART TIME position on dry hard
surfacedroads.Thisfeatureprovidesthesafety,security,
and convenience of operating in 4–wheel drive at all
timesregardlessofroadconditions.
5
km/h). Avoid attempting to engage or disengage 4L
with the vehicle moving faster than 2 to 3 mph (3 to 5
km/h).
When additional traction is required the 4 PART TIME
and4LOpositionscanbeusedtolockthefrontandrear
driveshafts together through the transfer case inter-axle
differential and force the front and rear driveshafts to
rotateatthesamespeed.Thisisaccomplishedbysimply
moving the shift lever to these positions. The 4 PART
TIMEand4LOpositionsareintendedforloose,slippery
roadsurfacesonly.Drivinginthe4PARTTIMEand4LO
positions on dry hard surfaced roads may cause in-
creasedtirewearanddamagetodrivelinecomponents.
Selec-TracாOperatingInformation/Precautions—
IfEquipped
TheSelec-Tractransfercaseprovides5modepositions-
normal 2-wheel drive mode, part-time 4-wheel drive
high range, full-time 4-wheel drive high range, neutral,
and4-wheeldrivelowrange.
This transfer case is equipped with an inter-axle differ-
ential which allows driving the vehicle in the 4 FULL
TIME position at all times on any given road surface
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)