DRIVING YOUR HYUNDAI
2
15
C300B01O-GAT
TCS ON Mode
C300D02O-GAT
Indicator and Warning
!
CAUTION:
In the TCS ON mode, the indicator in
theinstrumentclusterwillnotbeillumi-
nated.
The TCS indicator should illuminate
when the ignition key is turned to "ON"
or "START", but should go out after
three seconds.
If the indicator does not illuminate,
have it checked by an authorized
Hyundai dealer.
WhentheTCSindicatorblinks,SLIP
control has been activated. It also
means that the road is slippery or
yourcarisacceleratingexcessively.
In this situation, gently release foot
pressurefromtheacceleratorpedal
and maintain moderate speed.
NOTE:
1
) Turn off the engine. Then restart
the engine, and the TCS mode
will automatically turn "ON".
) When the traction control is op-
erating properly, you can feel a
slight pulsation in the vehicle.
This is only the effect of brake
control and indicates nothing
unusual.
2
Should there be any unusual condi-
tions in the device, TCS illuminates as
a warning.
!
WARNING:
If TCS illuminates, pull your car to a
safe place and stop the engine.
Then, start the engine again to check
if the TCS indicator goes out.
If the indicator remains lit even after
the engine has been started, have
your car checked by an authorized
Hyundai dealer.
Traction control is only a driving
aid; all normal precautions for driv-
ing in inclement weather and on
slippery driving surfaces should be
observed.
3) When the engine starts, a click is
heard from the engine compart-
ment; however, this is only the
sound of traction control being
checked.
4)
When moving out of the mud or
fresh snow, pressing the accel-
erator pedal may not cause the
engine speed to increase.
NOTE:
WhentheTCSindicatorilluminates,
tractioncontrolisautomatically de-
activated for safety.
Product Specification
Categories | Hyundai Manuals, Hyundai Matrix Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Matrix |
Document File Type | |
Copyright | Attribution Non-commercial |