6
DO-IT-YOURSELF MAINTENANCE
REPLACING HEADLIGHT
BULBS
36
G290B02FC-GAT
Adjustment After Headlight
Assembly Replacement
be checked using an aiming screen as
shown in the illustration. Turn on the
headlight switch. (Low Beam Position)
G260A03A-GAT
Before attempting to replace a head-
light bulb, be sure the switch is turned
to the "OFF" position.
The next paragraph shows how to
reach the headlight bulbs so they
may be changed. Be sure to replace
the burned-out bulb with one of the
same number and wattage rating.
See page 6-38 for the wattage descrip-
tions.
LHD
3
0mm (1.18 in.) Vertical line
1. Adjust headlights so that main axis
of light is parallel to the center line
of the body and is aligned with point
"P" shown in the illustration.
Horizontal line
W
"P"
2.
Dotted lines in the illustration show
the center of the headlights.
H
Cut-off line
L
Ground
line
Specifications:
H
"H"
Horizontal center line of headlights
from ground
!
G290B01L
CAUTION:
Keep the lamps out of contact with
petroleum products, such as oil,
gasoline, etc.
RHD
Vertical line
:
675 mm (26.5 in.)
Horizontal line
W
"W"
Distance between each headlight
center
"P"
H
Cut-off line
:
1,177 mm (46.3 in.)
30mm
(1.18 in.)
L
Ground
line
"L"
H
Distance between the headlights and
the wall that the lights are tested
against
G290B01L-D
If the vehicle has had front body repair
and the headlight assembly has been
replaced, the headlight aiming should
:
3,000 mm (118 in.).
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)