DO-IT-YOURSELFMAINTENANCE
6
29
On the backside of the mult box, you
will find a list showing the circuits
protected by each fuse.
If any of your car's lights or other
electrical accessories stop working, a
blown fuse could be the reason. If the
fuse has burned out, you will see that
the metal strip inside the fuse has
burned through. If you suspect a blown
fuse, follow this procedure:
Good
Burned out
G200B01FC
G200B03Y
1.
2.
Turn off the ignition and all other
switches.
4. Replace the blown fuse by pressing
a new fuse of the same rating into
place. The fuse should be a snug
fit. If it is not, have the fuse clip
repaired or replaced by a Hyundai
dealer. If you do not have a spare
fuse, you may be able to borrow a
fuse of the same or lower rating
from an accessory you can tempo-
rarily get along without (the radio or
cigarette lighter, for example). Al-
ways remember to replace the bor-
rowed fuse.
!
Open the fuse box and examine
each fuse. Remove each fuse by
pulling it toward you (a small "fuse
puller" tool is contained in the fuse
box to simplify this operation).
Be sure to check all other fuses
even if you find one that appears to
have burned out.
CAUTION:
A burned-out fuse indicates that
there is a problem in the electrical
circuit. If you replace a fuse and it
blows as soon as the accessory is
turned on, the problem is serious
and should be referred to a
Hyundai dealer for diagnosis and
repair. Never replace a fuse with
anything except a fuse with the
same or a lower amperage rating.
A higher capacity fuse could cause
damage and create a fire hazard.
3.
NOTE:
See page 6-39 for the fuse panel
descriptions.
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)