DO-IT-YOURSELFMAINTENANCE
6
CHECKING THE BRAKES
21
G120A01A-AAT
!
!
WARNING (Diesel only):
CAUTION:
Fluid level should be within this range
Never work on injection system
with engine running or within 30
seconds after shutting off engine.
High pressure pump, rail, injec-
tors and high pressure pipes are
subject to high pressure even af-
ter the engine stopped. The fuel jet
produced by fuel leaks may cause
serious injury, if it touch the body.
People using pacemakers should
not move than 30cm closer to the
ECU or wiring harness within the
engine room while engine is run-
ning, since the high currents in
the Common Rail system produce
considerable magnetic fields.
Because brakes are essential to
the safe operation of the car, it is
suggested that they be checked
and inspected by your Hyundai
dealer. The brakes should be
checked and inspected for wear at
those intervals specified in the
vehicle maintenance schedule in
Section 5.
C090A03FC
3
. If the transaxle fluid level is low,
use a funnel to add transaxle fluid
through the dipstick tube until the
level reaches the "HOT" range. Do
not overfill.
!
WARNING:
The cooling fan is controlled by
engine coolant temperature and
may sometimes operate even when
the engine is not running. Use
extreme caution when working
near the blades of the cooling fan
so that you are not injured by a
rotating fan blade. As the engine
coolant temperature decreases, the
fan will automatically shut off. This
is a normal condition.
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)