DO-IT-YOURSELFMAINTENANCE
6
CHANGING THE CLIMATE
CONTROL AIR FILTER
25
G140D01S-GAT
Checking the Compressor Drive
Belt
B140E02FC-AAT
(In Front of Blower Unit)
The climate control air filter is located
in front of the blower unit behind the
glove box.
It helps to decrease pollutants from
entering the car.
8mm
A/C
(0.315
in.)
KQNA020A
2.
Remove the filter cover by pulling
upward the hooks of the filter cover.
TENSION PULLEY
CRANK PULLEY
G140D01A
When the air conditioning is being
used regularly, the compressor drive
belt tension should be checked at
least once a month.
HLC2096
To check the drive belt tension, press
down on the belt halfway between the
engine crankshaft and compressor
pulleys. Pressing with your finger, you
should not be able to deflect this belt
anymore than 8.0 mm. If you have
the instruments to check it with a
force of 98N (22 lb.), the deflection
should be approx. 8.0 mm (0.315 in.).
If the belt is too loose, have it ad-
justed by your Hyundai dealer.
1.
Open the glove box and remove the
adjusting pins on both sides of the
glove box.
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)