3
WHAT TO DO IN AN EMERGENCY
10
D060F02E-AAT
5. Raising the Vehicle
D060G01Y-AAT
6. Changing Wheels
!
WARNING:
Do not get under the car when it is
supported by the jack! This is very
dangerous as the vehicle could fall
and cause serious injury or death.
No one should stay in the car while
the jack is being used.
Wrenchbar
Wheel nut wrench
HFC4022
D060G02FC
After inserting a wrench bar into the
wheel nut wrench, install the wrench
bar into the jack as shown in the draw-
ing.Toraisethevehicle,turnthewheel
nut wrench clockwise. As the jack be-
gins to raise the vehicle, double check
that it is properly positioned and will
not slip. If the jack is on soft ground or
sand,placeaboard,brick,flatstoneor
other object under the base of the jack
to keep it from sinking.
Loosen the wheel nuts and remove
themwithyourfingers.Slidethewheel
off the studs and lay it flat so it cannot
rollaway. Toputthewheelonthehub,
pick up the spare tire, line up the holes
with the studs and slide the wheel onto
them. If this is difficult, tip the wheel
slightly and get the top hole in the
wheel lined up with the top stud. Then
jigglethewheelbackandforthuntilthe
wheel can be slid over the other studs.
Raise the car high enough so that the
fullyinflatedsparetirecanbeinstalled.
To do this, you will need more ground
clearance than is required to remove
the flat tire.
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)