2
DRIVING YOUR HYUNDAI
6
C051A01O-EAT
Starting The Diesel Engine
3. After turning the ignition key to the
"ON"position,makecertainallwarn-
ing lights and gauges are function-
ing properly before starting the en-
gine.
NOTE:
If the engine does not start 10 sec-
ondsafterthepreheatingiscomplet-
ed, turn the ignition key once more
to the "LOCK" position, and then to
the "ON" position, in order to pre-
heatagain.
ENGINECOLD
o Turntheignitionkeytoposition"ON"
and wait for the pre-heat indicator
light to go out.
o Operate the starter until the engine
runs.
4.
On vehicles equipped with the die-
sel preheat indicator light, turn the
ignition key to the "ON" position.
The diesel pre-heat indicator light
will first illuminate in amber, and
then after a short time, the amber
illumination will goes off, indicating
that preheating is completed.
!
ENGINEWARM
WARNING:
Operate the starter. If the engine does
not respond on the first attempt, wait
severalsecondsandtryagainusingthe
pre-heat.
Be sure that the clutch is fully de-
pressed when starting a manual
transaxle vehicle. This will prevent
sudden movement should the ve-
hicle be started in gear without the
clutchdepressed.Otherwisethereis
thepotentialtocausedamagetothe
vehicle or injury to a person inside
oroutsideofthevehicleasaresultof
this sudden vehicle movement.
Amber lamp ON Amber lamp OFF
C050B03S-EAT
NORMAL CONDITIONS
TheStartingProcedure:
1.
2.
Insert key, and fasten the seat belt.
Depress the clutch pedal fully and
place the gearshift lever (manual
transaxle) in neutral or the selector
lever (automatic transaxle) in "P"
(park)position.
5.
Turntheignitionkeytothe"START"
position and release it when the en-
gine starts.
C050B01HP
fcuk-2.p65
6
12/27/2006, 10:14 AM
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)