6
DO-IT-YOURSELF MAINTENANCE
CHECKING AND CHANGING
THE ENGINE COOLANT
12
8
. After mounting a new centerpipe O-
ring, new oil filter element and new
O-ring to upper cap, install the up-
per cap to oil filter housing and
retighten by turning it clockwise.
Do not over-tighten.
10.Start the engine and check to be
sure no oil is leaking from the
drain plug or oil filter.
11.Shut off the engine and recheck
the oil level.
G050A01A-AAT
!
WARNING:
Do not remove the radiator cap
when the engine is hot. When the
engine is hot, the engine coolant
is under pressure and may erupt
through the opening if the cap is
removed. You could be seriously
burned if you do not observe this
precaution. Do not remove the
radiator cap until the radiator is
cool to the touch.
NOTE:
Tightening torque : 2.5 kgf.m
o It is recommended that the en-
gine oil and filter should be
changed by an authorized
Hyundai dealer.
o Always dispose of used engine
oil in an environmentally accept-
able manner. It is suggested that
it be placed in a sealed container
and taken to a service station for
maybe reclaimation. Do not pour
the oil on the ground or put it
into the household trash.
!
CAUTION:
Don't use old oil filter upper cap
O-ring and centerpipe O-ring
9.
Refill the crankcase with the rec-
ommended engine oil. Refer to
the specification in chapter 9 for
engine oil capacity.
!
!
CAUTION:
WARNING:
Slowly pour the recommended oil
by into a funnel. Do not overfill not
to damage the engine.
Used motor oil may cause irrita-
tion or cancer of the skin if left in
contact with the skin for prolonged
periods of time. Wash your hands
thoroughly with soap and warm
water as soon as possible after
handling used oil.
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)