Controls in detail
Automatic transmission
If you have selected the AMG menu in the
control system and you are driving in the
manual program mode M selected, the transmis- manual program mode M, upshift
Downshifting
i The manual program mode M will not be
stored. When the engine is turned off with the
Warning!
G
sion will go to the automatic program mode
indicator 2 in the multifunction display
(C or S) when the engine is restarted.
advises you to upshift before the engine
reaches the overspeed range. Thus you
can drive at the maximum engine speed for
each gear without overrevving the engine.
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced
vehicle control. Your vehicle’s ABS will not
prevent this type of loss of control.
Upshifting
!
In the manual program mode M, the trans-
mission will not upshift, even if the engine has
reached its overrewing range. Shift up to the
next gear before the engine has reached its over-
rewing range. Make absolutely certain that the
engine speed does not reach the red marking on
the tachometer (୴ page 28). Otherwise the en-
gine could be damaged which is not covered by
the Mercedes-Benz Limited Warranty.
̈ Briefly press left shift button 1
(୴ page 194).
The transmission shifts to the next
lower gear.
1
Gear indicator
2 Upshift indicator
i
When you brake or stop, the transmission
shifts down to a gear from which you can easily
accelerate or drive off.
̈
Briefly press right shift button 2
୴ page 194).
(
̈
Shift to the next higher gear.
The transmission shifts to the next
higher gear.
The fuel supply will otherwise be inter-
rupted to prevent the engine from over-
revving.
197
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |