Operation
Tires and wheels
Reactivating the Run Flat Indicator
̈ Switch on the ignition (୴ page 40).
If you wish to confirm activation:
The tire inflation pressure monitor must be
reactivated in the following situations:
Make sure the standard display menu
appears in the multifunction display
̈ Press button æ.
The following message will appear in
the multifunction display:
Run Flat Indicator
(
୴ page 147).
ț
If you have changed the tire inflation
pressure
̈ Press button k or j repeatedly
until the following message appears in
the multifunction display:
restarted
ț
ț
If you have replaced the wheels or tires
After a certain “learning phase”, the Run
Flat Indicator checks the set pressure val-
ues for all four tires.
If you have installed new wheels or
tires
̈
Using the tire placard on the driver’s
door B-pillar or, if available, the inside
of the fuel filler flap, make sure the tire
inflation pressure of all four tires is cor-
rect.
If you wish to cancel activation:
̈ Press button ç.
or
̈
Press the reset button on the instru-
ment cluster (୴ page 145).
̈
Wait until the message
Restart
Warning!
G
The following message will appear in
the multifunction display:
Restart
Run Flat Indicator?
Run Flat Indicator?
Yes
Cancel
The Run Flat Indicator can only warn you in
a reliable manner if you have set the correct
tire inflation pressures for each tire.
disappears.
Yes
If an incorrect tire inflation pressure was
set, the system will monitor the pressure ac-
cording to the incorrect value.
Cancel
378
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 4)
Automotive readers have rated 2007 Mercedes-Benz ML320 CDI ML350 ML500 ML63 AMG Owners Manual 4.0 out of 4.0 based on 2 product reviews.