Practical hints
What to do if …
Display message
Possible cause/consequence
Possible solution
ESP
unavailable
The ESP was deactivated because When the voltage is above this value again, the
®
See Operator’s Manual
of insufficient power supply. The
charging voltage has fallen below
ABS is operational again and the message in the
multifunction display should disappear.
10
volts.
If the message in the multifunction display does
The brake system is still functioning not disappear:
normally but without the ABS
̈
Have the generator (alternator) and the
battery checked.
available.
If the yellow ESP
®
warning
As soon as the brakes have cooled off, the
lamp v flashes while driving and electronic traction system switches on again.
this message appears, the electron-
ic traction system has switched off
to prevent overheating of the drive
wheel brakes.
The message in the multifunction display disap-
®
pears and the ESP warning lamp v goes
out.
The self-diagnosis has not been
completed yet.
The display will clear after driving a short
distance at a vehicle speed of above
12
mph (20 km/h).
437
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |