Practical hints
Flat tire
୴
୴̈ Position jack 3 under the take-up
bracket 2 so that it is always vertical
(plumb-line) as seen from the side,
even if the vehicle is parked on an in-
cline.
G
̈ Unscrew upper-most wheel bolt and
remove it.
Warning!
̈
Replace this wheel bolt with alignment
The jack is intended only for lifting the
bolt 1 supplied with the tool kit
vehicle briefly for wheel changes. It is not
suited for performing maintenance work
under the vehicle.
(
୴ page 469).
̈ Remove the remaining bolts.
Do not place wheel bolts in sand or dirt. This
ț
Never start the engine when the vehicle
is raised.
!
could result in damage to the bolts and wheel
hub threads.
ț
Never lie down under the raised vehicle.
̈
Remove the wheel.
Removing the wheel
̈
̈
Turn crank 4 clockwise until jack 3
is fully seated in take-up bracket 2
and the jack base evenly meets the
ground.
Continue to turn crank 4 until the
wheel is a maximum of 1.2 in (3 cm)
from the ground.
1
Alignment bolt
500
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 4)
Automotive readers have rated 2007 Mercedes-Benz ML320 CDI ML350 ML500 ML63 AMG Owners Manual 4.0 out of 4.0 based on 2 product reviews.