Getting started
Unlocking
SmartKey
mains on after starting the engine or
comes on while driving, refer to “Lamps
in instrument cluster” (୴ page 414).
Starting position
!
If the SmartKey cannot be turned in the
starter switch, the battery may not be sufficient-
ly charged.
3
ț
Check the battery and charge it if necessary
(୴ page 507).
i When you switch on the ignition, the indica-
tor and warning lamps (except high beam head-
lamp indicator lamp and turn signal indicator
ț
Get a jump start (୴ page 515).
To prevent accelerated battery discharge or a
lamps unless activated) in the instrument cluster completely discharged battery, always remove
come on. The indicator and warning lamps (ex-
cept high beam headlamp indicator lamp and
turn signal indicator lamps if activated) will go
out when the engine is running. This indicates
that the respective systems are operational.
the SmartKey from the starter switch when the
engine is not in operation.
Starter switch
0
1
For removing SmartKey
i When the SmartKey is removed from the
starter switch and the automatic transmission is
in a position other than P, the automatic trans-
mission automatically shifts to P.
Power supply for some electrical con-
sumers, such as seat adjustment
Ignition (power supply for all electrical
consumers) and driving position
2
All lamps (except high beam headlamp
indicator lamp and turn signal indicator
lamps unless activated) in the instru-
ment cluster come on. If a lamp in the
instrument cluster fails to come on
when the ignition is switched on, have
it checked and replaced if necessary. If
a lamp in the instrument cluster re-
40
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |