Controls in detail
Power windows
Fully opening the door windows
(Express-open)
If the upward movement of a door window
is blocked during the closing procedure,
the door window will stop and open slight-
ly.
Synchronizing the door windows
The door windows must be resynchronized
̈
Press switch 1, 2, 3, or 4
(୴ page 236) past the resistance point
ț
ț
after the battery was disconnected
and release.
̈ Remove the obstruction.
if the door windows cannot be fully
opened (Express-open) or closed
(Express-close)
The corresponding door window opens
completely.
̈ Pull the respective power window
switch past the resistance point again
and release.
i Each door window must be resynchronized
separately.
Fully closing the door windows
(Express-close)
i If the door window still does not close when
there is no obstruction, pull and hold the respec-
tive power window switch. The door window will
then close without the obstruction sensor
function.
̈
Close all doors.
̈
Pull switch 1, 2, 3, or 4
(୴ page 236) past the resistance point
̈ Switch on the ignition (୴ page 40).
Pull and hold power window switch 1,
, 3, or 4 (୴ page 236).
and release.
̈
2
The corresponding door window closes
completely.
Stopping door windows during
Express-operation
Once a door window is closed com-
pletely, hold the respective switch for
approximately 3 seconds.
̈ Press or pull respective power window
switch again.
Warning!
G
The door window is synchronized.
Driver’s door only:
If within 5 seconds switch is again pulled
past the resistance point and released, the
automatic reversal will not function.
238
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |