Getting started
Driving
Starting difficulties
̈ Get a jump start (୴ page 515).
Warning!
G
If the engine does not start as described,
carry out the following steps:
If the engine does not start after several
starting attempts, there could be a mal-
function in the engine electronics or in the
fuel supply system.
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from the starter switch, take it with you and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle. Children could release the
parking brake, which could result in an acci-
dent and/or serious injury.
̈
If you are starting the engine with the
SmartKey, turn SmartKey in starter
switch to position 0 and repeat starting ̈ Notify an authorized Mercedes-Benz
procedure.
Light Truck Center.
̈
If you are starting the engine with
KEYLESS-GO*: Close any doors that
may be open to allow for better
detection of the SmartKey with
KEYLESS-GO*.
Parking brake
̈
Release the parking brake by pulling on
release handle 2.
Or:
The warning lamp ; (USA only)
or 3 (Canada only) in the
instrument cluster goes out.
̈
̈
Remove KEYLESS-GO* start/stop
button from starter switch (୴ page 41).
Start the engine with the SmartKey as
radio signals from another source may
be interfering with the SmartKey with
KEYLESS-GO*.
1 Parking brake pedal
2
Release handle
̈
Repeat the starting procedure
(
୴ page 54). Remember that extended
starting attempts can drain the battery.
57
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |