Getting started
Parking and locking
Turning off with the SmartKey
Turning off with KEYLESS-GO*
Releasing seat belts
̈
Turn the SmartKey in the starter switch
to position 0 (୴ page 39).
̈ Press the KEYLESS-GO start/stop
button (୴ page 41) to turn off the
engine.
̈
Press the seat belt release button
(
୴ page 52).
̈
Remove the SmartKey from the starter
switch.
Allow the retractor to completely re-
wind the seat belt by guiding the latch
plate.
With the driver’s door closed, the start-
er switch is now in position 1. With the
driver’s door opened, the starter switch
The immobilizer is activated.
i If you turn off the engine using the SmartKey
and remove the SmartKey from the starter
switch with the transmission in a position other
than P, the transmission will automatically shift
to P.
is set to position 0, same as SmartKey ! Make sure the seat belt retracts fully so that
removed from starter switch
the seat belt and/or latch plate cannot get
caught or pinched in the door or in the seat
mechanism. This can damage the seat belt and
impair the effectiveness of the seat belt, and/or
cause damage to the door and/or door trim
panel. Such damage is not covered by the
Mercedes-Benz Limited Warranty.
(
୴ page 39).
i You can turn off the engine while driving by
pressing and holding the KEYLESS-GO
start/stop button for approximately 3 seconds.
Keep in mind that turning off the engine with the
SmartKey alone will not automatically shift the
transmission to P. Only when the SmartKey is
removed from the starter switch will the
transmission automatically shift to P.
i If you turn off the engine using the
KEYLESS-GO start/stop button and open the
driver’s door with the transmission in a position
other than P, the transmission will automatically
shift to P.
Damaged seat belts must be replaced. Contact
an authorized Mercedes-Benz Light Truck
Center.
Keep in mind that turning off the engine with the
KEYLESS-GO start/stop button alone will not
automatically shift the transmission to P. Only
when the driver’s door is opened will the
transmission automatically shift to P.
67
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |