Controls in detail
Useful features
୴
୴Step 5:
Step 7:
Step 9:
̈
After indicator lamp 1 changes from a ̈ To program the remaining two signal
̈ Press the “training” button on the ga-
slow to a rapidly flashing light, release
the hand-held remote control button
and the signal transmitter button.
transmitter buttons, repeat the steps
above starting with step 3.
rage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing two steps.
Rolling code programming
Step 6:
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
̈
Press and hold the just-trained signal
transmitter button (2, 3 or 4) and
observe indicator lamp 1.
Step 10:
̈
Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
If indicator lamp 1 stays on
constantly, programming is complete
and your device should activate when
the respective signal transmitter
button (2, 3 or 4) is pressed and re-
leased.
(
2, 3 or 4).
Step 11:
Press, hold for 2 seconds and release
Step 8:
̈
̈ Locate “training” button on the garage
door opener motor head unit.
same signal transmitter button a sec-
ond time to complete the training pro-
cess.
i If indicator lamp 1 flashes rapidly for about
seconds and then turns to a constant light,
continue with programming steps 8 through 12
as your garage door opener may be equipped
with the “rolling code” feature.
2
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
“training” button may also be referred
to as “learn” or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
Operator’s Manual.
i Some garage door openers (or other rolling
code equipped devices) may require you to
press, hold for 2 seconds and release the same
signal transmitter button a third time to
complete the training process.
318
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 4)
Automotive readers have rated 2007 Mercedes-Benz ML320 CDI ML350 ML500 ML63 AMG Owners Manual 4.0 out of 4.0 based on 2 product reviews.