Practical hints
Battery
Step 4 (Disconnecting)
i If the vehicle battery is discharged and you
had the vehicle jump started, turn off the engine.
̈
Remove SmartKey from starter switch.
Vehicles with KEYLESS-GO*:
̈
Make sure the vehicle’s on-board
electronics have status 0 (Turn off
the engine or all electrical systems
using the KEYLESS-GO start/stop
button. Open the driver’s door. With
the driver’s door open, the vehicle’s
2
Perforated floor carpet, unfolded
on-board electronics have status 0, 3 Air channel
4 Clip with pin insert
same as with the SmartKey
̈
Fold the floor carpet piece 2 in
direction of the arrow.
removed from the starter switch).
̈
Pull pin out of clip 4 in direction of
arrow.
̈
̈
Move the front passenger seat to the
most forward and upward position
again (୴ page 44).
̈ Enter the rear passenger compartment
again.
̈
̈
Pull clip with pin 4 outwards.
Switch off the ignition (୴ page 40).
Remove air channel 3
in direction of arrow.
by pulling it out
511
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |